Sigenergy battery (SigenStor)
A SigenStor battery module holds 6.0 or 9.0 kWh you can use, and one controller takes up to six. From 1 January 2027 the federal discount on an 18 kWh SigenStor is about $3,460.
- Usable energy per module
- 6.0 or 9.0 kWh
- Modules per controller
- 1 to 6
- Power per module
- 3 or 4.6 kW
- Discount on 18 kWh, 2027
- About $3,460
What a SigenStor battery is
SigenStor is Sigenergy's home battery system. Lithium iron phosphate (LFP) battery modules stack on an energy controller, and the controller is the inverter for both your solar panels and the battery. Sigenergy sells two module sizes in Australia, the BAT 6.0 and the BAT 10.0.
| Spec | BAT 6.0 | BAT 10.0 |
|---|---|---|
| Usable energy | 6.0 kWh | 9.0 kWh |
| Charge and discharge power | 3 kW | 4.6 kW |
| Peak power for 10 seconds | 4.5 kW | 6.9 kW |
| Weight | 62 kg | 78 kg |
One controller takes one to six modules, and both sizes can be used down to empty (100% depth of discharge). The modules are rated IP66 and can stand on the floor or hang on a wall. Single-phase controllers run from 4,999 W to 12,000 W and three-phase controllers from 5,000 W to 30,000 W, with two to four solar inputs (MPPTs).
Sigenergy says each module has its own optimiser inside, so a new module can sit beside older ones when you add storage later.
PENDING: the SigenStor battery warranty (years and energy throughput) from Sigenergy's Australian warranty document.
The federal discount on a SigenStor from 1 January 2027
The federal Cheaper Home Batteries discount pays certificates (STCs) for each usable kWh. From 1 January 2027 a battery earns 5.7 certificates per kWh for its first 14 kWh, 60% of that from 14 to 28 kWh, and 15% from 28 to 50 kWh. Storage above 50 kWh earns nothing. We assume a certificate sells for $37, which makes the first 14 kWh worth about $211 per kWh.
| Modules | Usable energy | Discount |
|---|---|---|
| 1 x BAT 6.0 | 6.0 kWh | About $1,270 |
| 1 x BAT 10.0 | 9.0 kWh | About $1,900 |
| 2 x BAT 6.0 | 12.0 kWh | About $2,530 |
| 2 x BAT 10.0 | 18.0 kWh | About $3,460 |
| 3 x BAT 10.0 | 27.0 kWh | About $4,600 |
| 4 x BAT 10.0 | 36.0 kWh | About $4,980 |
One BAT 10.0 comes to about $1,900 (9 kWh x 5.7 certificates x $37). Two come to about $3,460: about $2,950 for the first 14 kWh, plus 4 kWh x 5.7 x 60% x $37 for the rest.
- The battery must be CEC-listed and fitted by an SAA-accredited installer. The installer claims the certificates and takes the discount off your quote.
- The rate falls to 5.2 certificates per kWh on 1 July 2027 and keeps stepping down every six months until it ends after 2030. The federal budget update in December 2026 (MYEFO) may change it.
- Victoria has no battery rebate, and the Solar Homes battery loan is closed.
Read the battery rebate in 2027 for the full rules.
What a Sigenergy battery costs installed
We found no installed price for SigenStor in Melbourne from a source we could check, so this page gives none. Your price depends on the number of modules, the controller size, any solar added at the same time and your switchboard.
For what batteries cost installed per kWh, see battery cost per kWh. A written quote should name the modules, the usable kWh and the price after the federal discount.
Who a SigenStor suits
- A home that wants solar and a battery on one inverter. The controller runs both.
- A three-phase home. The three-phase controllers go up to 30,000 W.
- A home that wants to start small. You can begin with one module and add more on the same controller, up to six.
Winki Energy is a Sigenergy gold installer, based in Torquay and North Melbourne. Ask Winki Energy which batteries it quotes for your home.
Common questions
How much energy does a Sigenergy battery hold?
The BAT 6.0 module holds 6.0 kWh usable and the BAT 10.0 holds 9.0 kWh. One controller takes up to six modules.
How much is the federal discount on a Sigenergy battery in 2027?
From 1 January 2027, about $1,900 on 9 kWh, about $3,460 on 18 kWh and about $4,600 on 27 kWh, if a certificate sells for $37. The December 2026 federal budget update may change it.
Is Winki Energy a Sigenergy installer?
Yes. Winki Energy is a Sigenergy gold installer, based in Torquay and North Melbourne.
Can I add Sigenergy modules later?
Sigenergy says each module has an optimiser inside, so a new module can sit beside older ones. One controller takes up to six.
Sources
- Sigenergy, SigenStor BAT 6.0/10.0 Australian datasheet, version 20260429
- Sigenergy, SigenStor specifications, read 23 November 2026
- DCCEEW, Cheaper Home Batteries, read 23 November 2026
- Solar Victoria, solar batteries, read 23 November 2026